The snow is finally gone but it's very cold now, the yard has been repaired but work under these conditions is not easy.
After the mother "round" could not miss the first children " round "are just born but they are nice does not it? There are now six, five of 50 cm and a 65-cm. Eventually there will be about 60. Towards the bow the hull is as straight as can be and then tend to be large and tend to be closer to the rear. We have also tried to recover the waste produced to date, and then there are 65 plates, some 75, others 35, 40, 42, etc.. The right size (even according dix) is 50cm, it recovered after the waste we cut the sheets intact strips of width 50 cm to 150 cm. The maximum height is less than 150 cm, so we decided not to go crazy doing the nesting optimization of aluminum. The plates we have are 3000mm x 1500mm.
The installation is tedious but not difficult to use on the Internet we have seen strange gadgets created ad-hoc to match the sheets to us for the moment this does not seem necessary. The first 6 sheets perfectly curved back, of course you have to use a few tricks, sometimes an axis of wood to smash a corner, sometimes a tube to push, sometimes a piece on the weld metal to pry but nothing technological. It takes three people, one inside to take the pin and another on the roof to place the sheets and check the top and another to cut and place. Each plate is different from all others, and then a method that works for all not there.
December has passed and we did not do much, because of: adverse conditions, work, snow, parties and evils of the season. We will try to
60 hours to recover but there are many times and will slip significantly.
ALEMAR For now sends his greetings for the New Year to all my friends.
0 comments:
Post a Comment