Breasts Prominent Veins

Base Inspection

Since the boat is perfectly still turn is level and parallel to the water, we thought that making something that would allow us to install the perfect shady perperdincolare would be a great thing, this effort has resulted in a cylinder 330 mm in diameter and 50mm in height with a hole the middle just larger than the diameter of the rudder.
We realized at this point a hole and placed the base is perfectly level.

Before doing so, we realized we had made an "error" error, the height of the cylinder would have to be 80mm instead of 50 in fact fully compensate for the unevenness of the hull unfortunately the ideas are good but the night-day controls are not the same. Not living in the yard (as we would like) I simulated, including a phone call and another, the inclination of the hull by calculating the difference of inclination inside diameter of 90mm (bore diameter) which was found to 20mm (the glass that will contain the shady about 240mm). By telephone we finally decided to do it 330 mm in diameter, whereas no difference with the increase in diameter would have increased so much, Alessio who knows the practical work much better than me is basically a "full" and so decided to do it 50mm.

When we went to last place we realized that there were almost 30mm. After the initial panic and my sense of guilt we have decided to postpone the resolution of the problem the next day.
In a dream I solved the problem thinking placing the cylinder aligned with the lower part and filling the missing part with solder.
Luckily we did only 50 mm, remove it with the hose the excess to reshape the profile of the hull was a nightmare. We spent 2 days in fact 4 people, burned a flexible and consumed an infinite number of discs.
We finished at 11 on Saturday, the day of "gyration.